Vertical electric heating stirring jacketed pot


Product description

The vertical jacketed boiler uses a certain pressure of steam as the heat source (electric heating can also be used). The jacketed boiler has the characteristics of large heating area, high thermal efficiency, uniform heating, short liquid boiling time, and easy control of heating temperature.
The inner pot (inner pot) of the jacketed pot is made of acid-resistant and heat-resistant austenitic stainless steel, equipped with pressure gauge and safety valve, beautiful appearance, easy installation, convenient operation, safe and reliable.
The sandwich pot is specially used for the cooking and cooking of marinated meat products. It can also be used for the cooking and cooking of pharmaceuticals, dairy products, wines, preserves, candies, pastries, cans, etc. It is a food processing enterprise to improve product quality, shorten time, and improve Preferred equipment for working conditions
All food contact parts of the electric heating jacketed pot are made of 06Cr19Ni10 stainless steel, which meets the requirements of the "Food Sanitation Law of the People's Republic of China". It has beautiful appearance, reasonable design, compact structure, convenient installation, simple operation, flexible use, safe and reliable, and easy to maintain. And other characteristics, deeply loved and praised by the majority of users.
How to use the electric heating jacketed pot:
1. Connect electricity and fill with heat-conducting oil: (1) One R3/4"x90 outer thread head and 3/4 threaded ball valve at 45 rear right of the outer bladder arc, for exhaust. The exhaust device is in the clamp The highest end of the sleeve, which is conducive to the discharge of gas during the heating process of the heat transfer oil to prevent the heat transfer oil from splashing out during the heating process. (2) The 200L pot is filled with L-
When QC320 heat transfer oil is 38kq (the quantity is for reference only), first lay the pot flat, fix the pot body with the locking device, and then connect the exhaust ball valve with the oil inlet device for use, and open the oil measuring hole for draining. Please pay attention to the oil measuring hole, and put the pot flat until the heat-conducting oil overflows from this hole. This hole is also the usual heat-conducting oil observation hole. Please add it when the heat-conducting oil is less dry than this limit. (3) When the heat-conducting oil starts to heat up, remove the oil inlet device and open the exhaust ball valve. After heating, close the exhaust ball valve and shake the handle to turn the pot and pour the material. Use the oil inlet oiler device as an accessory. When refueling, connect the refueling device and the exhaust ball valve for use, and remove it after refueling. (4) After the pot, PT100 is used to measure the temperature of the heat transfer oil, and the set temperature is detected by the electric control box. When the set temperature is exceeded, it will not continue to heat, on the contrary, when it is lower than the set temperature, it will continue heating. (5) Install a 3/4 ball valve (high temperature resistant to 300℃) at the bottom of the oil drain device. This ball valve can be opened when the oil needs to be drained, which can make the oil drain more convenient.
2. Clean the pot and put in the materials. You should inject heat-conducting oil first, turn on the power, and turn off the power when the materials reach the required temperature and the predetermined heating time. The hand wheel can be turned to tilt the pot body for unloading. At this point, one job is completed.
3. Check the capacity of the heat transfer oil every time you perform an operation to avoid dry burning and damage to the equipment.
4. To ensure the cleanliness of the heat transfer oil, it should be replaced every 3 months.
5. In order to keep it clean, it should be cleaned every time it is used.
6. Before using the tiltable jacketed pot, check whether the rotating part is well lubricated. Fill the oil cup with grease and inject a proper amount of grease into the bite of the worm wheel and worm.

Related products

Welcome your message consultation